Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of Wisconsin

House Washing for Log Homes in Wisconsin

Low-pressure wash for log homes. A full exterior wash of siding, trim, soffits and eaves that removes dirt, cobwebs, mildew and algae. Typical cost $300-$700.

House Washing for Log Homes is one of the jobs we do most often in Wisconsin. Typical jobs cost $300-$700, and you approve the price before we begin. On log homes, the method we use is low-pressure wash.

How we clean it

Low-pressure washCleaning method
Low pressure with a wide tip; higher pressure only as part of stripping old finish before refinishingPressure

Cleaning solution: A log-safe wood cleaner or oxygen-based cleaner; strippers only when refinishing.

What to know about cleaning log homes

Log homes need regular cleaning to keep mildew and insects from settling into checks and cracks, and the logs must be clean and dry before a new stain goes on.

Avoid: High pressure that furs the wood and forces water deep into checks in the logs.

How often: Every 1-2 years, and before each refinish.

Signs you need house washing for log homes

  • Green or black film on the shaded sides of the house
  • Dirt splash along the bottom of the walls
  • Cobwebs and wasp nests under the eaves
  • Chalky or dull-looking siding
  • You're planning to paint, sell or list a rental

Why it gets dirty

  • Mildew and algae in shade and humidity
  • Rain splashing soil onto the bottom courses
  • Pollen, dust and road grime
  • Spiders and insects under the soffits

Safe steps for homeowners

  • Rinse small areas with a garden hose and a soft brush on an extension pole
  • Use a mild detergent made for siding, not household bleach straight from the bottle
  • Clear plants and furniture away from walls before a wash
  • Look for loose siding, open seams or damaged caulk before anyone washes the house

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Water driven under siding laps and into wall cavities
  • Broken window seals and water inside the house
  • Stripped paint, raised wood grain or etched stucco from high pressure
  • Ladder falls while spraying

Our process for house washing for log homes

  1. Walk the house and point out problem areas or damage
  2. Cover outlets, lights and fixtures, and pre-wet landscaping
  3. Apply a soft wash solution from the bottom up
  4. Rinse from the top down at low pressure, including eaves and soffits
  5. Rinse plants, check windows and walk the house with you

How much does house washing for log homes cost?

$300-$700Typical range for a typical 1,500-2,500 sq ft home
2-4 hoursTypical time on site
Every 1-2 yearsRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Serving Wisconsin and nearby towns

In Wisconsin, snow and slush that sit against the house leave a band of grime and mildew along the lower siding, and shaded north walls stay damp long after the thaw. A spring soft wash removes winter grime before it bakes on over the summer.

Much of Wisconsin has hard water. Sprinklers and misters leave white mineral spots on walls, windows, fences and pool tile, and those spots need a mineral-safe cleaner, not more pressure.

We cover 276 cities and towns across Wisconsin. Find house washing for log homes in your city:

House Washing for Log Homes: frequently asked questions

How much does house washing for log homes cost in Wisconsin?

House Washing for Log Homes typically costs $300-$700 for a typical 1,500-2,500 sq ft home, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for house washing for log homes?

For log homes: low pressure with a wide tip; higher pressure only as part of stripping old finish before refinishing. What we avoid: high pressure that furs the wood and forces water deep into checks in the logs. The cleaning solution does most of the work, followed by a gentle rinse.

Is house washing for log homes safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule house washing for log homes?

Every 1-2 years, and before each refinish. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Wisconsin

Deck Restoration & Staining

Deck restoration that cleans or strips the old finish, brightens the wood and applies a new penetrating stain or sealer.

Typical $800-$2,500

Screen Enclosure & Lanai Cleaning

Cleaning pool cages, screen rooms and lanais, including the frame, screens and the deck below.

Typical $200-$500

Graffiti Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $200-$800

Commercial Pressure Washing for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $400-$2,000

Pre-Paint Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $250-$600

Roof Cleaning for Metal Roofs

Soft wash. Painted metal roofs collect dirt, mildew and oxidation chalk.

Typical $400-$1,000

Pre-Paint Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $250-$600

Commercial Pressure Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $400-$2,000

Fence Cleaning for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $200-$600

Rust Stain Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$500

Paver Cleaning & Sealing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $600-$1,800

Patio Cleaning for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $150-$400

Ready for a cleaner home or business?

Get a free pressure washing quote in Wisconsin. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote