Grime, mildew and stains build up a little at a time until one day the outside of your property looks years older. Pressure Washing for Pavers in Wisconsin brings it back, usually in a single visit. For pavers, that means pressure wash with a surface cleaner.
How we clean it
Cleaning solution: A paver cleaner or pre-treatment; efflorescence needs a dedicated cleaner.
What to know about cleaning pavers
Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them. Re-sanding the joints, often with polymeric sand, and sealing afterward keeps weeds and ants out and holds the pavers in place.
Avoid: A narrow tip aimed into the joints, which blows out sand and can loosen pavers.
How often: Clean every 1-2 years; reseal every 2-4 years.
When to book pressure washing for pavers
- Driveway or walkways look dark, gray or streaky
- Green or black growth in shaded areas and along edges
- Slippery surfaces after rain
- Oil, rust or tire marks you can't scrub out
- You're getting ready to sell, seal or paint
What causes the dirt and stains
- Dirt and pollen that settle into the pores of concrete
- Mold, mildew and algae in damp, shaded spots
- Oil and fluid drips from vehicles
- Rust from sprinklers, furniture and fertilizer
- Tire marks and general foot traffic
What you can do yourself
- Sweep off leaves and loose debris so they don't stain
- Blot fresh oil drips with cat litter or an absorbent right away
- Point sprinklers away from walls and walkways to cut down on rust and hard-water stains
- Rinse pollen off with a garden hose during heavy pollen season
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Why more pressure isn’t better
- Etched lines and 'zebra stripes' from holding a narrow tip too close
- Water forced into window frames, door sills and siding laps
- Damaged plants and lawns from chemical runoff
- Injuries: a zero-degree tip can cut skin, and wet surfaces are slippery
What happens on the day
- Walk the property and note surfaces, stains and anything fragile
- Protect plants, outlets, lights and doors, and move small items
- Pre-treat organic growth and degrease oil spots
- Clean with the right pressure and a surface cleaner for even results
- Rinse, post-treat to slow regrowth, and walk the job with you
Pressure Washing for Pavers cost in Wisconsin
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for pavers
- Driveway Cleaning for Pavers
- Sidewalk & Walkway Cleaning for Pavers
- Patio Cleaning for Pavers
- Pool Deck Cleaning for Pavers
- Paver Cleaning & Sealing for Pavers
- Rust Stain Removal for Pavers
- Oil Stain Removal for Pavers
- Gum Removal for Pavers
- Efflorescence Removal for Pavers
Local pressure washing for pavers for Wisconsin
Freeze-thaw cycles and deicing salt are hard on concrete in Wisconsin. Cleaning it in spring and sealing it before winter reduces how much water and salt soak in, which is what causes surface flaking (spalling).
We cover 276 cities and towns across Wisconsin. Find pressure washing for pavers in your city:
- Milwaukee
- Madison
- Green Bay
- Kenosha
- Racine
- Appleton
- Waukesha
- Eau Claire
- Oshkosh
- Janesville
- West Allis
- La Crosse
Pressure Washing for Pavers: frequently asked questions
How much does pressure washing for pavers cost in Wisconsin?
Pressure Washing for Pavers typically costs $150-$600 for a typical home's driveway, walkways and patio, and usually takes 1-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for pressure washing for pavers?
For pavers: usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possible. What we avoid: a narrow tip aimed into the joints, which blows out sand and can loosen pavers. We keep the pressure even and controlled, with the right tools for the surface.
Is pressure washing for pavers safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule pressure washing for pavers?
Clean every 1-2 years; reseal every 2-4 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.