Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of Wisconsin

Rust Stain Removal for Stucco in Wisconsin

Soft wash for stucco. Removing orange rust stains from sprinklers, fertilizer, furniture and well water on concrete, siding and masonry. Typical cost $150-$500.

Looking for rust stain removal for stucco in Wisconsin? We look at the surface first, choose the right method and pressure for it, and give you a price before any work starts. With stucco, the right approach is soft wash.

Method and pressure

Soft washCleaning method
Soft wash only, typically under 500 PSIPressure

Cleaning solution: A diluted house-wash solution with surfactant, given time to dwell, then a gentle rinse.

Cleaning stucco safely

Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots. Hairline cracks are common, and high pressure can force water into them or break off the finish coat.

Avoid: High pressure, which can etch the texture, blow out patches and push water behind the wall.

How often: Every 1-2 years.

Is it time for rust stain removal for stucco?

  • Orange or brown streaks where sprinklers hit
  • Orange speckles from fertilizer granules
  • Rust rings under furniture or planters
  • Orange runoff below metal railings

Why it gets dirty

  • Iron in well water or irrigation water
  • Fertilizer containing iron
  • Rusting metal furniture, railings and fixtures

What you can do yourself

  • Sweep fertilizer granules off concrete right after spreading
  • Adjust sprinklers to avoid walls and paths
  • Ask about an iron filter for well-water irrigation

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Using the wrong acid, which can etch concrete or discolor siding
  • Pressure washing, which doesn't remove rust and can etch the surface

What happens on the day

  1. Identify the stain source
  2. Apply a surface-safe rust remover
  3. Let it work and rinse
  4. Repeat on stubborn spots
  5. Advise on stopping the source

How much does rust stain removal for stucco cost?

$150-$500Typical range for typical sprinkler or fertilizer staining
1-3 hoursTypical time on site
As needed; stains return if the source isn't fixedRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for stucco

Rust Stain Removal for Stucco in Wisconsin

Rust and salt stains are the typical spring clean-up jobs in Wisconsin: orange marks from metal furniture and fertilizer, and white salt residue on driveways, walkways and garage floors.

Much of Wisconsin has hard water. Sprinklers and misters leave white mineral spots on walls, windows, fences and pool tile, and those spots need a mineral-safe cleaner, not more pressure.

We cover 276 cities and towns across Wisconsin. Find rust stain removal for stucco in your city:

Rust Stain Removal for Stucco: frequently asked questions

How much does rust stain removal for stucco cost in Wisconsin?

Rust Stain Removal for Stucco typically costs $150-$500 for typical sprinkler or fertilizer staining, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for rust stain removal for stucco?

For stucco: soft wash only, typically under 500 PSI. What we avoid: high pressure, which can etch the texture, blow out patches and push water behind the wall. The cleaning solution does most of the work, followed by a gentle rinse.

Is rust stain removal for stucco safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule rust stain removal for stucco?

Every 1-2 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do, and sealers and stains need dry weather to cure. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Wisconsin

Deck Restoration & Staining

Deck restoration that cleans or strips the old finish, brightens the wood and applies a new penetrating stain or sealer.

Typical $800-$2,500

Screen Enclosure & Lanai Cleaning

Cleaning pool cages, screen rooms and lanais, including the frame, screens and the deck below.

Typical $200-$500

Graffiti Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $200-$800

Commercial Pressure Washing for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $400-$2,000

House Washing

A full exterior wash of siding, trim, soffits and eaves that removes dirt, cobwebs, mildew and algae.

Typical $300-$700

Pre-Paint Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $250-$600

Roof Cleaning for Metal Roofs

Soft wash. Painted metal roofs collect dirt, mildew and oxidation chalk.

Typical $400-$1,000

Pre-Paint Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $250-$600

Commercial Pressure Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $400-$2,000

Fence Cleaning for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $200-$600

Paver Cleaning & Sealing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $600-$1,800

Patio Cleaning for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $150-$400

Ready for a cleaner home or business?

Get a free pressure washing quote in Wisconsin. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote